Bradley TDB3108 Specifications download pdf (Page 12)

TDB3108, WF3208 Installation

12 1/23/2013 Bradley • 215-1471 Rev. F; ECN 13-00-001

Air Metering Valve Assembly for B Drain and H Drain Units with

Tie Pipe Option continued...

Place the actuator module assembly on top of the

sprayhead. Drop 1/8" diameter tube down to the

valve assembly and connect to the air valve.

Skip to step F for units without soap.

For units with soap option, slide the spacer and

soap dispenser over the 1-1/2" pipe.

Position the upper tie bar slightly below the module

or soap dispenser and fasten securely to vent pipe

with set screws provided. Secure top cover to tie

bar with two cap screws provided.

FOR B UNIT: Install 1/2" nominal copper supply

lines (pass through holes in cover and through

support column) and connect supply lines to stops

using suitable fittings.

UNIT WITH “H” DRAIN AND ACTUATOR

MODULE SHOWN, ALSO AVAILABLE

WITH “B” DRAIN

Top

Cover

Soap

Dispenser

Spacer

Module

Cover

Actuator

Module

Assembly

(S65-132)

Tie Bar

Sprayhead

(S05-054B

Support Tube

Standard (S57-005)

TAS/Juv (S57-006)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

Bradley TDB3108 Specifications Page 12