Bradley TDB3108 Specifications download pdf (Page 20)

TDB3108, WF3208 Installation

20 1/23/2013 Bradley • 215-1471 Rev. F; ECN 13-00-001

Actuator Module Components

* Included in Actuator Assembly (S65-168)

Metering Air Valve Maintenance

Adjust Air Valve Meter Time

Duckbill Check* (198-010)

Piston* (119-227A)

U-Cup* (125-099)

Spring* (135-065)

Screw (160-165)

Actuator Body* (118-279)

Straight Tube Connector* (169-890)

Nut (110-115)

Acutator Bracket (140-743)

Pushbutton Assembly (S08-324)

Remove filter cap and use a screwdriver to

tighten or loosen the timer. Turning the timer

clockwise increases the time; turning the

timer counterclockwise decreases the time.

The air valve timer is located next to the tube connector on the air valve body. The timer is capped with

a filter to prevent build-up on the timer. The air valve timing can be adjusted from 5 to 60 seconds.

Continue to adjust until the timer is set at

desired length.

Replace filter cap over the timer.

Tube Connection Leaks

Push in the white manual release button

while pulling the tube out to disconnect the

tube at the connector. No tools are needed.

To correct a leak, press tubing firmly into the

connector and make sure it is seated.

If leak persists, remove tubing from the fitting

and trim the tubing end square with a razor-

sharp knife. If leak continutes, replace the

fitting or contact your Bradley representative

for assistance.

Air Valve Tubing

Manual Release

Button

Sealing Ring

Tube Stop

Gripping Ridge

Locking Slope

1 2 ... 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Bradley TDB3108 Specifications Page 20

Comments to this Manuals

Related products and manuals for Sanitary ware Bradley TDB3108